walimex pro Audioadapter 107 XLR adapter met versterker

walimex Audioadapter 107 * 2 channel XLR adapter with pre-amplifier and phantom power * ideal of all DSLRs with an integrated microphone socket * The audio adapter is attached to the camera via a 1/4 inch threadThe walimex pro audio adapter is a 2 channel XLR adapter with pre-amplifier and phantom power. Ideal of all DSLR cameras with an integrated microphone socket A display shows optical monitoring of the sound recording. There is also a wide range of settings to optimise the sound quality. The audio adapter can be attached simply from below via a 1/4 inch thread to the camera.Functions: * LCD Display: Level status display in dB * GAIN switch: Signal amplifier low to high +20dB * PEAK switch: On/off switch of the LED signal displays. LEDs flash red in the event of overload * Monitor PLAY/REC switch: Play for headset - playback of camera audio signals. REC for headset - recording of audio signals during recording * AGC on/off switch: when activated (on) the output level of the camera is kept constant. Note: Function only possible with AGC cameras. Read the manual for your camera to learn more about this. * M/S switch: to select mono (M) or stereo (S) output mode * POWER switch: On/off switch * PHANTOM 12 V/48 V switch. For 12 or 48V condenser microphones. Note: Most microphones use 12 V. Read the manual for your microphone to learn more about this. * LINE/MIC/PH switch * LINE mode is for amplifiers and other audio devices with a line output. The signal is reduced to approx. 40dB * MIC mode is for self-powered microphones * PH (phantom) mode is for microphones with a pH value that require a phantom setting.Technical specification: * Input 2 x XLR input symmetrical 1 x 3.5 mm jack input * Output 1 x 3.5 mm audio output 1 x headset output * Input signal MIC: 0 dB at -44 dBu Input LINE: 0 dB at +10 dBu Input * Output signal Normal mic levels * Frequency range 20 Hz - 20 kHz (+/-0.5 dB) * THD less than 0.01 % at 1 kHz -30 dBu Input * S/N 85 dB at 1 kHz -30 dBu Input * GAIN LO gain: 0 dB Hi gain: 20 dB * Phantom power 12 or 48 V / 14 mA * Level Meter -18 dB to +3 dB in 3dB steps * Battery 1 x 9 V block battery (3 hours without phantom power) * Weight 599 g * Size (L x W x H) 155 x 98 x 64 mm